Recording
Recording a TV program
Recording and viewing the same TV program.
| |
CH | / |
PAUSE/STILL | |
STOP | |
REC |
|
SPEED | |
Recording a TV program
1 Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2 Press SPEED to select the desired tape speed SP or SLP.
The tape counter and SP orSLPwill appear on the screen for about 4 seconds.
3 Select “TV” or “CABLE” to the appropriate position 21 .
TV - VHF/UHF channels
CABLE - Cable TV channels
4 Press Direct channel selection 
/
to select the channel to be recorded.
CH 110
5 | Press REC to start recording. |
| |
| “ ” will appear on the screen for |
| about 4 seconds and the REC |
| indicator on the front panel will light. |
Notes:
•The unit channel cannot be changed during recording.
•If power is switched off during recording, the TV goes off and the VCR continues to record. Press STOP to halt the recording and turn off the VCR.
To stop recording
Press STOP to stop recording.
“
” will appear on screen for about 4 seconds.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted material.
“ 
” will appear on the screen and the REC indicator will blink on and off. Press PAUSE/STILL or REC to continue the recording.
CH 110
Note:
The pause function will be released after 5 minutes to prevent damage to the tape or the unit. The unit will change to the STOP mode.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape.
Note:
If the erase prevention tab is removed, the tape will eject when REC is pressed for recording.
32
5S20101A | 32 | 12/16/04, 4:28 PM |
