E6581343 ③
2.2. PDP002Z Device Data
Parameter | Value | Note |
Vendor_Name | "TSIJ" | - |
Model_Name | "PDP002Z" | - |
Revision | "V1.1" | - |
Ident_Number | 0x093C | ID number |
Protocol_Ident | 0 |
|
Station_Type | 0 | DP slave |
FMS_supp | 0 | |
Hardware_Release | "V1.0" | - |
Software_Release | "V1.0" | - |
9.6_supp | 1 | 9.6kbps: supported |
19.2_supp | 1 | 19.2kbps: supported |
45.45_supp | 1 | 45.45kbps: supported |
93.75_supp | 1 | 93.75kbps: supported |
187.5_supp | 1 | 187.5kbps: supported |
500_supp | 1 | 500kbps: supported |
1.5M_supp | 1 | 1.5Mbps: supported |
3M_supp | 1 | 3Mbps: supported |
6M_supp | 1 | 6Mbps: supported |
12M_supp | 1 | 12Mbps: supported |
MaxTsdr_9.6 | 60 | 60 bit tiime |
MaxTsdr_19.2 | 60 | 60 bit tiime |
MaxTsdr_45.45 | 250 | 250 bit tiime |
MaxTsdr_93.75 | 60 | 60 bit tiime |
MaxTsdr_187.5 | 60 | 60 bit tiime |
MaxTsdr_500 | 100 | 100 bit tiime |
MaxTsdr_1.5M | 150 | 150 bit tiime |
MaxTsdr_3M | 250 | 250 bit tiime |
MaxTsdr_6M | 450 | 450 bit tiime |
MaxTsdr_12M | 800 | 800 bit tiime |
Redundancy | 0 | not supported |
Repeater_Ctrl_Sig | 2 | TTL level |
24V_Pins | 0 | not used |
Freeze_Mode_supp | 1 | supported |
Sync_Mode_supp | 1 | supported |
Set_Slave_Add_Supp | 0 | not supported |
Auto_Baud_supp | 1 | supported |
Min_Slave_Intervall | 1 | 0.1ms |
Fail_Safe | 0 | mode: not supported |
Modular_Station | 1 | - |
Max_Module | 1 | ID: 1 byte |
Max_Input_len | 20 | Input: 20 bytes |
Max_Output_len | 20 | Output: 20 butes |
Max_Data_len | 40 | Data length: 40 bytes |
User_Prm_Data_Len | 2 | - |
Max_User_Prm_Data_Len | 2 | - |
- 4 -
