Toshiba Qosmio F30 HDD Priority Options, Network Boot Protocol, Wake-upon Keyboard, HDD1, [PXE], [RPL], HDD2 −, Enabled, Built-in, Built-in, Disabled, (Default), Built-inHDD2

HW Setup

HDD Priority Options

This option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot from the HDD.

Built-in HDD1 −>		The computer will look for the Built-in HDD1 first,
Built-in HDD2		next the Built-in HDD2 (Default).
(Default)
Built-in	HDD2 −>	The computer will look for the Built-in HDD2 first,
Built-in	HDD1	next the Built-in HDD1.

■If a boot command is not found on the first detected HDD, the system will not boot from the other HDD. It will search the next device in the boot priority for a boot command.

■Although, generally, most models have two hard disks installed, some models have only one hard disk. In the case of models with one hard disk, this setting item will not be displayed.

Network Boot Protocol

This feature sets the protocol to remotely boot from the network. [PXE] Sets PXE as the protocol (Default).

[RPL] Sets RPL as the protocol.

Keyboard

Wake-up on Keyboard

When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode.

Enabled	Enables the Wake-up on Keyboard function.
Disabled	Disables the Wake-up on Keyboard function
	(Default).

User’s Manual 7-5