Toshiba Qosmio F30 Saver, start, start, Standby, HW Setup, TOSHIBA RAID, TOSHIBA Power, Control Panel, Control Panel, TOSHIBA Controls, TOSHIBA HWSetup icon

Introduction

Standby	If you have to interrupt your work, you can turn off
	the power without exiting from your software.
	Data is maintained in the computer’s main
	memory. When you turn on the power again, you
	can continue working right where you left off.
TOSHIBA RAID	RAID (Redundant Array of Independent Disks)
	realizes high performance (striping = RAID0) or
	fault tolerance (mirroring = RAID1), which is
	configured by arraying multiple independent hard
	disk drives.

Utilities

This section describes preinstalled utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files.

TOSHIBA Power	To access this power savings management
Saver	program, click start, click the Control Panel,
	click Performance and Maintenance and click
	the TOSHIBA Power Saver icon.
HW Setup	This program lets you customize your hardware
	settings according to the way you work with your
	computer and the peripherals you use. To start
	the utility, click start and click Control Panel,
	click Printers and Other Hardware and click the
	TOSHIBA HWSetup icon.
TOSHIBA Controls	This utility lets you do the following:
	■ Buttons: Assign applications to the REC,
	Brightness down, Brightness up, DOLBY,
	TV-out buttons.

1-12 User’s Manual