Toshiba Qosmio F30 CD-RW, When writing or rewriting, ■Apply impact or vibration to the computer, ■Change users in the Windows XP operating system

Operating Basics

■Do not write while virus check software is running. Wait for it to finish and then disable virus detection programs including any software that checks files automatically in the background.

■Do not use hard disk utilities, including those intended to enhance hard disk drive access speed. They may cause unstable operation and data damage.

■CD-RW (Ultra Speed +) media is not available. If used, data may be lost or damaged.

■Write from the computer’s hard disk drive to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device.

■Writing with software other than TOSHIBA Disc Creator and InterVideo WinDVD Creator Platinum are not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

■Do not perform any of the following actions when writing or rewriting:■Change users in the Windows XP operating system.

■Operate the computer for any other function, including using a mouse or Touch Pad or closing/opening the LCD panel.

■Start a communication application such as a modem.■Apply impact or vibration to the computer.

■Install, remove or connect external devices, including the following: PC card, SD card, Memory Stick/Memory Stick Pro, xD picture card, MultiMediaCard, USB devices, external monitor, i.LINK devices, optical digital devices.

■Use the Audio/Video control button to reproduce music or voice.

■Do not use shut down/log off and standby/hibernation while writing or rewriting.

■Make sure writing or rewriting is completed before going into standby/hibernation. Writing is completed if you can remove an optical media.

■Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand.

■Keep mobile phones and other wireless communication devices away from the computer.

■Always copy data from the hard disk drive to the optical media. Do not use cut-and-paste. The original data will be lost if there is a write error.

User’s Manual 4-17