Toshiba Qosmio F30 Changing settings, Replacing the batteries, Activating Media Center for the first time, Yes, Settings, TV SIGNAL SETUP, Set Up TV Signal

Using the Remote Controller, Front operation button and QosmioPlayer

Replacing the batteries

When the batteries in the Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.

1.Open the battery cover on the back side of the Remote Controller.

2.Replace the batteries.

Be sure to place the batteries with their polarities (+ and -) in the correct position.

Batteries

Removing the batteries

3.Close the battery cover.

Close the cover securely until it clicks.

Watching TV

Activating Media Center for the first time

Activate Media Center.

The setup screen appears. Configure settings according to your environment. Follow the screen instructions and configure settings according to the environment used.

Changing settings

Refer to the following procedures to change settings that are already configured.

1.Activate Media Center.

2.Click in the following order: Settings -> TV -> Set Up TV Signal.

3.Click Yes for the TV SIGNAL SETUP message.

4.Follow the screen instructions and configure settings according to the environment used.

User’s Manual 8-13