Toshiba Qosmio F30 USB mouse, start, Mouse, start, start, Problem, Setting, Buttons, Procedure, Mouse icon, Mouse icon, Control Panel, Control Panel, Control Panel

Troubleshooting

Problem

The reaction of Touch pad is either too sensitive or not sensitive enough.

Procedure

Adjust the touch Sensitivity.

1.Click start and open the Control Panel.

2.Click the Printers and Other Hardware icon.

3.Click the Mouse icon.

4.Click the Device Setting tab.

5.Click the Setting button.

6.The Properties for Synaptics Touch pad on PS/2 port screen appears. Double-click Sensitivity in the Select an item section on the left side of the screen.

7.PalmCheck and Touch Sensitivity are displayed. Click Touch Sensitivity.

8.Move the slide bar for Touch Sensitivity to make an adjustment. Click the OK button.

9.Click the OK button on the Device Setting tab.

USB mouse

ProblemProcedure

On-screen pointer does not respond to mouse operation

The system might be busy. If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it.

Make sure the mouse is properly connected to the USB port.

Double-clicking does	Try changing the double-click speed setting in
not work	the mouse control utility.
	1.	Click start, click Control Panel, click
		Printers and Other Hardware and select
		Mouse icon.
	2.	Click the Buttons tab.
	3.	Set the double-click speed as required and
		click OK.
The mouse pointer	Try changing the speed setting in the mouse
moves too fast or too	control utility.
slow	1.	Click start, click Control Panel, click
		Printers and Other Hardware and select
		Mouse icon.
	2.	Click the Pointer Options tab.
	3.	Set the speed as required and click OK.

User’s Manual 10-13