Features, Utilities and Options

7. Remove two screws securing the keyboard.Use a point size 0 Phillips screwdriver.

8.Lift up the back of the keyboard, rotate it toward you and lay in face down on the palm rest.

■Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

■When you move the keyboard forward, do not touch the keys. Doing so could cause misalignment. Hold the keyboard by the sides and lay it gently on the palm rest.

■The keyboard is connected to the computer by a keyboard ribbon cable. Be careful not to apply tension to this cable when you lift up the keyboard. Do not try to disconnect this cable.

Screws

Figure 3-4 Removing two screws and rotate the keyboard

9.Raise the insulator sheet covering the memory module to appear the module. And keep the insulation sheet raised using adhesive tape.

Insulation sheet

Figure 3-5 Raising the insulation sheet

3-16

User’s Manual