Toshiba RAS-13JKVP-E Operation - Stop - Operation, ON timer - OFF timer Stop - Operation - Stop

Combined timer (Setting the ON and OFF timers simultaneously) OFF timer —> ON timer

(Operation —> Stop —> Operation)

This feature is useful when you want to stop the air conditioner after you go to sleep, and start it again in the morning when you wake up or you return home.

Example:

To stop the air conditioner and start it again next morning

Setting combined TIMER

(1)Press the OFF OFF button to set the OFF timer.

(2)Press the ON ON button to set the ON timer.

(3)Press the SET SET button.

Operation Operation again

Stop

ON timer —> OFF timer

(Stop —> Operation —> Stop)

You can use this setting to start the air conditioner when you wake up and stop it when you leave the house. Example:

To start the air conditioner the next morning and stop it

Setting combined TIMER

(1)Press the ON ON button to set the ON timer.

(2)Press the OFF OFF button to set the OFF timer.

(3)Press the SET SET button.

	Operation
Stop	Stop

•The ON or OFF timer function that is closer to the current time is activated first.

•If the same time is set for both ON and OFF timers, no timer operation is performed. Also, the air conditioner may stop operating.

CAUTION

Approximately 3 seconds later, the remote control will transmit the signal to the indoor unit and a receiving beep will sound from the indoor unit after you press the

SET SET button.

Daily combined timer (setting the ON and OFF timers simultaneously and activating every day.)

This feature is useful when you want to use the combined timers at the same time every day.

Setting combined TIMER

(1)	Press the ON	ON button to set the ON timer.
(2)	Press the OFF	OFF	button to set the OFF timer.
(3)	Press the SET	SET	button.
(4)	After step (3), an arrow mark ( or ) flashes for about 3 seconds. Press the
	SET SET button during this flashing.

• Both arrows ( , ) are shown while the daily timer is activated.

Cancelling timer operation

Press the CLR CLR button.

Clock display

During TIMER operation (ON-OFF, OFF-ON, OFF timer), the clock indicator is not shown so the setting time can be displayed. To view the current time, press the SET button briefly and the current time will be displayed for about 3 seconds.

	PAP			AUTO
		TEMP
	MODE			PRESET
	HiPOWER	ECO		MEMO
				1.3.5.9H
c	SWING	FIX	FAN	SLEEP
	CLR			SET
a
	CLOCK	ON	OFF	FILTER
b	RESET
		CHECK

EN 12