AUTOMATIC OPERATION
When you set the air conditioner to AUTO mode, it automatically selects cooling, heating, or fan only operation depending on the room temperature. () see page 16.)
The fan speed and louver are also automatically controlled.
Start
a button
Press this button to start the air conditioner.
bAUTO button (AUTO) Press AUTO button.
•The OPERATION indicator (green or orange) on the display panel of the indoor unit lights. The operating mode is selected according to the room temperature and operation starts after approximately 3 minutes.
•If the AUTO mode is uncomfortable, you can select the desired conditions manually. The temperature, fan speed and louver position can be changed, and MODE is also changed from AUTO to A when the fan speed or louver position is changed.
The fan speed indicator is also shown.
Stop
button
Press this button again to stop the air conditioner.
b
PAP AUTO
TEMP
MODEPRESET
a
HiPOWER ECO MEMO
1.3.5.9H
SWING FIX FAN SLEEP
CLR |
| SET |
ON | OFF | FILTER |
CLOCK |
| |
|
| |
RESET |
|
|
CHECK |
|
|
AUTOMATIC OPERATION (AUTO CHANGEOVER)
When you set the air conditioner to A mode or switch over from AUTO operation because of a change in settings, the air conditioner automatically selects cooling, heating, or fan only operation depending on the room temperature. () see page 16.)
Start
a button
Press this button to start the air conditioner.
bMode select button (MODE) Select A.
cTemperature button (TEMP) Set the desired temperature.
•The OPERATION indicator (green or orange) on the display panel of the indoor unit lights. The operating mode is selected according to the room temperature and operation starts after approximately 3 minutes.
•The temperature, fan speed and louver position can be changed. You can select the desired conditions manually.
Stop
button
Press this button again to stop the air conditioner.
c b a
PAP AUTO
TEMP
MODEPRESET
HiPOWER ECO MEMO
1.3.5.9H
SWING FIX FAN SLEEP
CLR |
| SET |
ON | OFF | FILTER |
CLOCK |
| |
|
| |
RESET |
|
|
CHECK |
|
|
EN | 8 |