Toshiba RAS-13JKVP-E owner manual TROUBLESHOOTING Remote Control, Auto, Settings Cannot be Changed

TROUBLESHOOTING (Remote Control)

Before asking for servicing or repairs, check the following points.

Settings Cannot be Changed

	Symptoms		Causes		Description and Remedy
The fan speed cannot be		•	Check whether the MODE indicated		When automatic mode is selected, the
changed.			on the display is “AUTO”.		air conditioner automatically selects
			AUTO		the fan speed.
		•	Check whether the MODE indicated		When dry operation is selected, the air
			on the display is “ : DRY”.		conditioner automatically selects the
					fan speed. The fan speed can be
			: DRY
					selected during “ COOL”,
					“ HEAT” and “A”.
			The Display Goes Off
	Symptoms		Causes		Description
The indicators on the display		•	Check whether the timer operation is		The air conditioner stops since the
are not shown after a short			over when the OFF TIMER is shown		setting time has elapsed.
time.			on the display.
The TIMER display turns off		•	Check whether the timer operation		When the time reaches the time
after a certain period of time.			has started when the ON TIMER is		setting for the ON timer operation, the
			shown on the display.		air conditioner starts to operate
			: ON		automatically and the ON timer display
					turns off.
		The Signal Receiving Tone Does Not Sound
	Symptoms		Causes		Description
No receiving tone is made from		•	Check whether the signal transmitter		Point the signal transmitter of the
the indoor unit even when the			of the remote control is properly		remote control towards the receiver of
	button is pushed.		pointed towards the receiver of the		the indoor unit, and then press the
			indoor unit when the	button is	button repeatedly.
			pushed.

EN 28