Basic operations
Programming a recording (REC MENU) (Continued)
Using elapsed programming data (Make an entry of the same TV programme)
1)Press the REC MENU button. The REC MENU appears.
2)Press the QUICK MENU button.
4)Press the 
/ buttons to select an entry, then press the ENTER button or press the ADJUST button.
The recorder calculates on a bar graph how much a specific programme (identified by a check mark) will occupy on the disc.
The Quick Menu appears.
3)Press the 
/ buttons to select “Elapsed Programing”, then press the ENTER button. The list of the past entry records appears.
The latest 9 entries are listed.
You can access following and previous pages by pressing the PICTURE SEARCH (
/
) button.
4)Press the 
/ buttons to select an entry you want to use, then press the ENTER button. Information corresponding to the selected programme appears on the Timer Programing list.
5) Press the / 
buttons to select an item, then press the ADJUST button to modify the item.
6)When complete, press the ENTER button.
7)Press the REC MENU button to exit.
Note
•The recorder stores the latest 36 entries. A new entry erases the oldest one when the number of entries is over 36.
Remaining volume
1)Press the REC MENU button. The REC MENU appears.
2)Press the QUICK MENU button. The Quick Menu appears.
3)Press the 
/ button to select “Disc Budget Calculation” then press the ENTER button. The Disc Budget Calculation menu appears.
Pressing the ADJUST button can display or remove the check mark.
e.g. | MENUREC Disc Budget Calculation |
|
| 06/17(Tu) | 19:25 | ||||||||
|
| CH | Date |
| Start |
| End | Media | Mode Rate | Audio Result | |||
|
| 3 | 6/18(Wed) | 11:30 – 11:50 | HDD | MN | 6. 0 | D2 |
| ||||
|
| 10 | 6/19(Thu) | 21:30 – 22:00 | DVD | MN | 6. 0 | D2 |
| ||||
|
| 42 | 6/19(Thu) | 22:30 | – | 23:30 | HDD | LP | 2. 2 | D1 |
| ||
|
| 4 | 6/20(Fri) |
| 20:30 | – | 23:30 | DVD | SP | 4. 4 | D2 |
| |
| HDD | Elapsed |
| ( | )Selected(current) | Available | DVD |
| |||||
|
| Select | Return |
| Adjust | Revise List | |||||||
Selected entry | Available disc volume |
When the entry item is marked X, the 
recording does not end. Change the setting.
5)Correct the parameters of the entry if necessary.
(Skip to step 7 if you do not need this.) You can change “Media”, “Mode”, “Rate”, and “Audio”.
Select an item you want to modify and press the ENTER button. The item will be ready to be altered. Press the ADJUST button to modify. When complete, press the ENTER button.
6)Press the 
button.
Programme modification is registered.
7)Press the REC MENU button to exit the GUI.
Notes
•When a Reservation disc is inserted in the recorder
(
page 75), you cannot check the remaining volume of other discs.
•You can calculate up to eight programmes at a time for remaining volume, starting from one closer to the start time of the programme entry.
40
