55
Basic operations Playback Recording Editing Function setup Others
Introduction Dubbing
TOSHIBA RD-XS30B Ope
Playback
HDD
Pausing a TV broadcast to resume later
This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time,
by storing the TV broadcast temporarily on the HDD.
1While viewing a TV broadcast via this recorder,
press TIMESLIP.
The current picture pauses.
The recorder begins to store the broadcast on the HDD
the moment you press the TIMESLIP button.
2Resume playback by pressing PAUSE or PLAY.
•You can confirm how far you are from the current
broadcast by pressing the TIME BAR button.
•Resume playback may not start immediately after you
press the PLAY or PAUSE button.
3Locate a scene you want by the following
methods.
Fast-forward/fast-reverse:
Press the PICTURE SEARCH button.
Slow-motion:
Press the SLOW button.
Forward frame by frame play:
First press the PAUSE button then press the FRAME button.
•To resume normal playback, press the PLAY button.
•You can play in fast-forward to within 10 seconds prior to the
current broadcast. To view the current broadcast, press the
TIMESLIP button to exit this playback mode.
4Press TIMESLIP to exit this mode.
The recorder stops storing the broadcast on the HDD.
A message appears and asks you whether you will save
the stored data or erase it.
Press the / buttons to select, then press the ENTER
button.
TIMESLIP
PAUSE
PLAY
TIMESLIP
Notes
•This function is not available during recording.
•While using this pause TV recording, reverse slow-motion playback and reverse frame by frame playback are not available.
•Pause TV recording stops when the HDD is filled up. It will not begin if the HDD is full.
• While using this pause TV recording, you cannot programme the recorder.
•Pause TV recording does not start to work automatically at turning–on of the power. Every time you want to use this function,
perform the steps 1 to 4 above.
PICTURE SEARCH
FRAME
TIME BAR
SLOW
RD-XS30B.Ope(US)p049-066 2/15/03, 2:58 AM55