Toshiba RD-XS32SC Remote control, Clock, Others Before calling service personnel Continued

Others

Before calling service personnel (Continued)

Remote control

The remote control does not work.

•The batteries in the remote control are exhausted.

→Replace all the batteries in the remote control ( page 12, “INSTALLATION GUIDE”).

•The light emitter of the remote control is not pointed at the receptor of this recorder.

→Point the emitter of the remote control at the receptor of this recorder.

•The receptor of this recorder is located too far away from the remote control.

→Operate the remote control within 7 meters (23 ft) from the receptor of this recorder.

•There are obstacles between the remote control and this recorder.

→Remove any obstacles.

•The receptor is disturbed by sunlight or fluorescent light.

→Change the place of this recorder or shield the light.

•The remote mode is not appropriate.

→Adjust the remote mode of the remote control and this recorder ( page 48, “INSTALLATION GUIDE”).

Clock

The clock blinks.

→Complete the initial setting again ( page 28, “INSTALLATION GUIDE”).

The clock does not keep time.

→Set the time and date manually ( page 31, “INSTALLATION GUIDE”).

→Set “Summer time” or “Time zone” correctly ( page 32, “INSTALLATION GUIDE”).

168