Toshiba RD-XS32SC, RD-XS32SU owner manual Remaining volume, Press / to select a program, then press

Recording

Programming a recording (REC MENU) (Continued)

Elapsed programing (using past data for programing)

1)Press REC MENU.

The REC MENU appears.

2)Press QUICK MENU. The Quick Menu appears.

3)Press/ to select “Elapsed programing”, then press ENTER.

The “Elapsed programing” list appears.

4)Press/ to select a program, then press

ENTER.

5)Press/to select an item to correct, then press ADJUST to change the value.

6)When complete, press ENTER.

7)Press REC MENU to exit.

Remaining volume

1)Press REC MENU.

The REC MENU appears.

2)Press QUICK MENU. The Quick Menu appears.

3)Press/ to select “Disc budget calculation” then press ENTER.

The Disc budget calculation menu appears.

4)Press/ to select a timer program, then press ENTER or press ADJUST.

The recorder calculates on a bar graph how much a specific program (identified by a check mark) will occupy on the disc.

Pressing the ADJUST button can display or remove the check mark.

Note

•Up to 36 past programs are saved. Additinn of a new one deletes the oldest one.

Elapsed programing (using past data for programing)

1)On the REC MENU, press QUICK MENU.

2)Press/ to select “Elapsed programing”, then press ENTER.

The “Elapsed programing” list appears.

3)Press/ to select a program to delete.

4)Press QUICK MENU, then/ to select “Elapsed programing delete”, and press

ENTER.

The selected data is deleted.

If you want to delete all data at once, select “All elapsed programing delete”.

e.g. REC	Disc budget calculation								4/3 (Sa) 9:00 pm
MENU
	CH	Date	Start		End	Media		Video			Audio Result
	3	4/10 (Sa) 11:30		pm–11: 50 pm		HDD		MN 6.		6	D/M2
	10	4/13 (Tu)	9 :30	pm–10	:00 pm	DVD		MN 6.		6	D/M2
	42	4/16 (Fr) 10:30		pm–11	:30 pm	HDD		LP	2.	2	D/M1
	4	4/16 (Fr)	8 :30	pm–11	:30 pm	DVD		SP	4.	6	D/M2
HDD	Elapsed		( ) Selected(current)				Available				DVD

Selected program Available disc space

When the entry item is marked X, the recording does not fit. Change the setting.

5)Correct the parameters of the timer program if necessary.

(Skip to step 7 if you do not need this.) You can change “Media”, “Video” and “Audio”.

Select an item you want to modify and press the ENTER button. The item will be ready to be altered. Press the ADJUST button to modify. When complete, press the ENTER button.

You can adjust to a lower mode (SP to LP) and/or lower the rate to reduce the quality of the recording, and thus provide more disc capacity (space).

6)Press .

Program modification is registered.

7)Press REC MENU to exit the GUI.

44