Toshiba RD-XS32SU Shifting a time period of a recording Time Shift, Adding a timer program

•Setting “On” may create many chapters, and their number may reach the maximum allowed. At that point, no more chapters can be created. In this case,

decrease the chapters, for example by combining

chapters ( page 95).

•This feature is not available on DVD-R/RW discs. To

create chapters automatically during recording on DVD-R/RW discs, set “DVD-Video:CHP create.” ( page 162).

Genre setting

You can set a genre before setting programmed recording.

To see the registered list, refer to Genre setting ( page 163).

Set the genre according to recording contents. The selection you have made for the timer program is shown at the bottom of the display.

Shifting a time period of a recording (Time Shift)

If a prior TV program extends beyond its scheduled time and into one that you programmed, you can shift the programmed start and end time of the recording.

1:00pm1:54pm

Time Shift

20 minutes extend

1:20pm2:14pm

1)Press REC MENU.

The REC MENU appears.

2)Press / to select a timer program you want to shift the time period.

3)Open the lid of the remote control and press

EXTEND.

“Start time” and “End tme” are ready to be input.

4)Press EXTEND repeatedly.

Each time you press the button, “Start time” and “End time” is shifted in 10 minutes intervals to, up to 60 minutes later.

5)Press ENTER.

6)Press REC MENU to exit.

Note

•After you shifted the time of a timer program which will be repeated daily or weekly, you should restore the original start/stop time for future recordings.

Adding a timer program

1)Press REC MENU.

The REC MENU appears.

2)Press to select a blank line, then press

ENTER.

3) Press / to select the item, then press ADJUST to set the item.

4)When complete, press ENTER.

5)Press REC MENU to exit.

Note

•While the recorder is preparing for or executing a programmed recording, you cannot add a timer program which will start within 5 minutes and 15 seconds from the current time.

Deleting a timer program

1)Press REC MENU.

The REC MENU appears.

2)Press / to select a timer program you want to delete.

3)Press QUICK MENU. The Quick Menu appears.

4)Press / to select “Program cancel”, then press ENTER.

Check the message, then delete the entry.

5)Press REC MENU to exit.

Note

•You cannot delete a timer program while another is executed.

Correcting a timer program

1)Press REC MENU.

The REC MENU appears.

2)Press / to select a timer program you want to change, then press ENTER.

3) Press / to select an item, then press ADJUST to set the item.

4)Press ENTER.

The modification is registered.

5)Press REC MENU to exit.

Important

•You cannot correct a timer program within 5 minutes before the recording start time. You can only delete the timer program.

Note

•You can program a timer recording whose start time has already passed, unless the another program recording will start within 5 minutes. The portion of the program before the recording starts cannot be saved.

Introduction RecordingPlayback

Editing

Library Function setup Others

43