6F3B0360 |
(3)Fold the tension member, and insert the collar through the jacket of optical fiber core wire until the collar went under the cord housing. The collar shall be exposed from the edge of housing removal by 1 mm or less.
Housing | Housing | Collar | ||
Jacket | Collar |
|
| |
|
|
| Jacket | |
Tension member |
| max. 1 mm |
| |
is divided to two |
|
|
|
|
|
|
|
| |
equal portions. |
|
|
|
|
Figure 9.11 Collar insertion | Figure 9.12 | Protrusion of collar | ||
(4)Using the jacket remover (use the hole at 0.5 side of label indication), remove the cover (semi-transparent) of core wire of the optical fiber.
Housing | Core cover |
Clad
max. 2 mm
Figure 9.13 Residual length of core cover
TOSLINE S20 | 33 |
