4 Replacement Procedures
Installing the Expansion Memory
CAUTION: Do not touch the connectors on the expansion memory or on the computer. Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module:
1.Set the computer to boot mode and turn off the power.
a.The computer is turned on.
b.The computer was shut down using the Stand by mode.
c.Power to the optical media drive has been turned on by the CD Power switch.
2.Remove all cables connected to the computer.
3.Turn the computer upside down and remove the battery.
4.Loosen the safety screw securing the memory module socket cover.
5.Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-14 Removing the expansion memory cover
Satellite M40X Series Maintenance Manual | [CONFIDENTIAL] |
