Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Amplifier equipped with a

VIDEO

Y

PB PR

Dolby Digital decoder

 

 

VIDEO OUT

 

S

R

L

COAXIAL OPTICAL AUDIO OUT

 

To COAXIAL

ANALOG

BITSTREAM/PCM

To OPTICAL

 

 

DIGITAL

 

 

 

type digital

type digital

 

 

Connect either.

audio input

audio input

 

 

 

 

 

75 coaxial cable

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Use DVD video discs encoded via the Dolby Digital recording system.

Make the following setting.

On-screen display

Select:

Page

 

 

 

 

 

“Audio Out Select”

“Bitstream”

58

61

 

 

 

 

 

 

 

 

 

Recording system

 

 

D

43

 

 

 

 

 

 

 

Connections

Optical digital cable

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a

Make the following setting.

On-screen display

Select:

Page

center speaker, and one or two rear speakers).

“Audio Out Select” “Analog 2ch”

58

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

*

Amplifier equipped with

VIDEO Y PB PR

Dolby Surround Pro Logic

VIDEO OUT

S

R

L

COAXIAL OPTICAL AUDIO OUT

To audio input

ANALOG

BITSTREAM/PCM

 

 

DIGITAL

To ANALOG AUDIO OUT

Audio cable

61

Be sure to set “Audio Out Select” to “Analog 2ch” when you enjoy sounds of Dolby Surround Pro Logic using this connection.

*Connect one or two rear speakers.

The output sound from the rear speakers will be monaural even if you connect two

rear speakers.

21

Page 21
Image 21
Toshiba SD-330ESB manual Dolby Digital, Dolby Surround Pro Logic