PREPARATION
21
Operation with DVD and Video CD (Continued)
General Features (continued)
Still Picture and Frame-by-frame playback
1Press PAUSE/STEP during playback.
The DVD/CD Receiver will now go into PAUSE mode.
2You can advance the picture frame-by-frame by press-
ing PAUSE/STEP repeatedly on the remote control.
3To return to normal play, press PLAY.
Slow Motion
1Press SLOW -or +during playback.
The DVD/CD Receiver will enter SLOW mode.
2Use the SLOW SCAN -or +to select the required
speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward),
or T1/16, T1/8, T1/4 or T1/2 (forward).
3To return to normal play, press PLAY.
Note
Slow motion playback in reverse is not applicable for
Video CD.
Repeat A-B
To repeat a sequence in a title or group:
1Press REPEAT A-B at your chosen starting point.
“ A * ” appears briefly on the TV screen.
2Press REPEAT A-B again at your chosen end point.
“A B” appears briefly on the TV screen, and the repeat
sequence begins (“RPT” appears on the display window).
3To cancel the sequence, press REPEAT A-B.
Repeat
DVD Video Discs - Repeat Chapter/Title/Off
1To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs - Repeat Track/All/Off
1To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
3To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 18.
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2Within 10 seconds, press 33/44to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4Within 10 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
-:--:--
0:16:57
DVD
OFF
ALL
TRACK
TITLE
CHAPT
VCD1.1VCD2.0
DVD
OFF
A B
A *
VCD1.1VCD2.0
DVD
VCD1.1VCD2.0
DVD
VCD1.1VCD2.0
DVD