Speaker Setup |
| Additional Information |
|
|
|
Adjust the following settings for the
Disc Audio
Disc Subtitle
Disc Menu | R | R |
|
| |
Rating | Front L |
|
Area Code | Volume | 0 dB |
| Size | Small |
TV Aspect | ||
Menu Language | Distance | 0.3m |
Progressive Scan | Test |
|
| Return |
|
5.1 Speaker Setup |
|
|
|
|
|
Others |
|
|
1 Select “5.1 Speaker Setup” using the 3/4 buttons on the setup menu.
2 While “5.1 Speaker Setup” is selected, press 2 button.
3Press 2 buttons to select the desired speaker.
4Adjust options by using 341 2 buttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak- ers (Left), Front speakers (Right), Centre Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Volume
Press 1 / 2 to adjust the output level of the selected speaker.
Size
Since the speaker settings are fixed, you cannot change the settings.
Distance
If you connected speakers to your DVD/CD Receiver , setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.
Note
You can not set the distance of subwoofer speaker.
Test
Press ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.
Front Left (L) → Centre → Front Right (R) → Rear Right (R) → Rear Left (L) → Subwoofer
Return
Press ENTER to return to the previous menu.
Last Condition Memory
DVD CD VCD1.1
This DVD/CD Receiver memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its set- tings memorized, the latest stop position is automatical- ly recalled.
Notes
Settings are stored in memory for use any time.
This DVD/CD Receiver does not memorize settings of a disc if you switch off the DVD/CD Receiver before commencing to play it.
This function does not work when STOP is pressed twice (“ 
” will appear on the screen).
System Select
You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE on the front panel or remote control for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO).
When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed.
AUTO: Select when DVD/CD Receiver is connected with Multi system TV.
NTSC: Select when DVD/CD Receiver is connected with
PAL: Select when DVD/CD Receiver is connected with
OPERATION
27
