Toshiba SD-K741SU Interlaced outputs/inputsColorStream, Progressive outputs/inputs ColorStreamPro

Interlaced outputs/inputs(ColorStream®)

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.

Actual labels for component video inputs may vary depending on the TV manufacturer.(ex.Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Progressive outputs/inputs (ColorStream®Pro)

Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allow you to view the highest quality picture with less fl icker.

Consumers should note that not all high defi nition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the "standard defi nition" output. If there are questions regarding our TV set compatibility with this model 480p DVD player, please contact our Customer Service Center.

Signal Flow

Connections

(red)	(white)
	To PR	To PB
To ANALOG AUDIO OUT	VIDEO	VIDEO
	OUT	OUT
To audio inputs	of
the amplifi er
(red)	(white)

Cables are not supplied Audio system

■Before switching interlace video output to progressive scan, be sure to set "Video Output" to "Y PB PR")

You can temporarily switch the output signal for better picture quality.

Press PROGRESSIVE on the remote control during stop.

To wall outlet

To Y

VIDEO

OUT

To Y video inputs

To PB video inputs

To PR video inputs

	TV or monitor with com-
	ponent video inputs
● Making the following setting.
On-screen display	Select:	Page
"Digital Output"	"Bitstream"	56
	or	60
	"PCM"
"Video Output"	Y PB PR	59

Notes

Refer to the owner’s manual of the connected equipment as well.

When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away from the tuner and radio.

The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers.

Turn off the amplifi er before you connect or disconnect the DVD video player’s power cord, if you leave the amplifi er power on, the speakers may be damaged.

Analog audio out will not have sound DTS playback.

19