Toshiba SD-K741SU manual Location of the required label

The instructions shall state that an ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building.

CAUTION: These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualifi ed to do so.

In the spaces provided below, record the Model and Serial No. Located on the rear panel of your DVD video player.

Model No. Serial No.

Retain this information for future reference.

Location of the required label

Introduction

THIS PRODUCT COMPLIES WITH DHHS RULE 21 SUBCHAPTER J PARTS
1040-10 AND 1040-11 AT DATE OF MANUFACTURED .
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY	MANUFACTURED
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST AC-
CEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
TOSHIBA CORPORATION	SERIAL NO.
1-1, SHIBAURA 1-CHOME, MINATO-KU,
TOKYO 105-8001, JAPAN

Be aware that this equipment is still powered even after the ON/STANDBY indicator turns off (standby mode) by pressing the ON/STANDBY button. To disconnect this equipment completely from the main power, pull out the power plug from the wall outlet.

3