Connections
nnecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player. to optional audio equipment.
●For connection to your TV, see “Connecting to a TV“.
18
19
●For details of output sound, see 
42
.
●This section uses the following reference marks..
:Front speaker
:Rear speaker
:Sub woofer
:Center speaker
:signal fl ow
Notes:
●DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the
●Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the "DIGITAL (COAXIAL)" input of a Receiver or Processor.
●Refer to the owner’s manual of the connected equipment as well.
●When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
●The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
●Turn off the amplifi er before you connect or disconnect the DVD video player’s power cord. If you leave the amplifi er power on, the speakers may be damaged.
Notice
●When you are connecting (via the BITSTREAM/PCM AUDIO OUT jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) decoding function, be sure to set "Digital Output" to "PCM" from the
●When playing
20
