Basic Operation
Turning On the Projector
1 | Complete peripheral connections (with a computer, |
| VCR, etc.) before turning on the projector. |
2 | Connect the projector’s AC power cord into an AC |
| outlet. The POWER indicator becomes red. Open the |
| lens cover. |
3 | Press the POWER |
| top control or on the remote control. The POWER |
| indicator becomes green and the cooling fans start |
| to operate. The preparation display appears on the |
| screen and the count down starts. |
4 | After the countdown, the input source that was |
| selected the last time and the Lamp mode status icon |
| (see page 52) appears on the screen. |
5 | If there is no signal input when start on the projector, |
| or the current signal is missed while operating the |
projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ed buttons
and press the SELECT button. And then follow the input signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN code Input Dialog Box appears. Enter the PIN code as instructed on the next page.
✔Notes:
•When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.46)
•When the Logo select function is off, the logo is not shown on the screen. (p.48)
•When the "Countdown off" or "Off" is selected in the Display function, the countdown is not shown on the screen. (p.47)
•During the countdown period, all operations are invalid.
•When the "Off" is selected in the Display function, the Video/PC selection window and the input signal guidance window are not shown on the screen. (p.47)
16
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 52 for Lamp mode.)
Video / PC selection window
Input signal guidance window
No signal
Current Input setting:Video
Is signal processed correctly?
Is cable connected properly?
Video / PC selection window
Input signal guidance window
No signal
Current Input setting:RGB
Is signal processed correctly?
Is cable connected properly?
18
