Eiki LC-XD25 owner manual Setting, Keystone, Blue back, Display

store the keystone correction even when the AC power cord is unplugged.

reset the keystone correction when the AC power cord is unplugged.

Setting

Keystone

This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the SELECT button. The keystone dialog box appears. Correct keystone with the Point ed buttons. (p.23)

Store . .

Reset . .

Blue back

Press the Point 7 8 buttons to switch On/Off. When this function is "On", a blue image is displayed while the input signal is not detected.

Display

Press the Point 7 8 buttons to switch On/Off. This function decides to display On-Screen Displays.

On . . . . . . Show all the On-Screen Displays. Use this function when you want to project images after the lamp becomes bright enough. Factory default setting is this mode.

Countdown off . . Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off . . . . . . Do not show On-Screen Displays, except;

●On-Screen Menu

●"Power off?" message

●P-Timer

●"No signal" message for Power management item (p.51)

●"Please wait..." message

●Arrows for panning mode in the Screen Menu (p.34)

47