Recording (VCR)
VCR DVD | ||
4 | ||
The | ||
convenient way to make a timed recording. | 2 | |
| 5 |
STOP 4
One-touch Timer Recording (OTR)
Preparation:
•Turn ON the TV and select to the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR indicator will light.)
Example:
4 Press Number button or CH +/– to select the channel to be recorded.
1 | 2 | 3 |
| SET + | CH 110 |
|
|
|
|
| |
4 | 5 | 6 | CH – |
| CH + |
| ENTER |
|
SET –
7 8 9 0
1 Load a cassette tape with the erase prevention tab intact.
The VCR will automatically turn on.
2 Press SP/SLP to select the desired tape speed SP or SLP.
The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.
SP/SLP
PLAY MODE
00 : 00 : 00 SP
3 Set “TV” or “CA TV” option to the appropriate position 27 .
TV - VHF/UHF channels
CATV - CABLE TV channels
5 Press OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours.
| The OTR and recording time will | |||
| appear on the screen for about 4 | |||
| seconds. And, “ | ” will appear on | ||
| the display. |
|
| |
|
|
|
|
|
Press | Recording time | Press | Recording time |
|
once | NORMAL REC | 6 times | 3:00 |
|
twice | 0:30 | 7 times | 4:00 |
|
3 times | 1:00 | 8 times | 5:00 |
|
4 times | 1:30 | 9 times | 6:00 |
|
|
|
|
|
|
5 times | 2:00 | 10 times | NORMAL REC |
|
| OTR 0 : 30 |
REC/OTR | CH 110 |
| |
| INDEX |
To cancel OTR
Press STOP or turn off the power.
STOP
“ ” will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 43 .
36