Toshiba SD-V291 Stereo recording and playback, Second Audio Program (SAP)

Other functions (VCR)

Stereo recording and playback / Second Audio Program (SAP)

AUDIO SELECT

SET +/–

VCR MENU

ENTER CANCEL

Stereo recording and playback

The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.

When a MTS STEREO broadcast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo.

The Hi-Fi stereo recording pro- STEREO cedure is the same as for normal recordings.

Note:

When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case “STEREO” will not appear and the sound will be in mono.

AUDIO SELECT

AUDIO

Output selection

When viewing an MTS stereo TV program, or playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R” and “L” positions allow the audio from the Right or Left Hi- Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT	SOUND HEARD ON BOTH
SELECTION	SPEAKERS
STEREO	STEREO
L CH	LEFT CHANNEL AUDIO
R CH	RIGHT CHANNEL AUDIO
MONO	MONO

Second Audio Program (SAP)

Your DVD/VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

1 Press VCR MENU. Then press SET + or – to select “SAP”.

				MENU
VCR MENU			SET +	TIMER REC SET
				AUTO REPEAT	ON	OFF
SETUP				SAP	ON	OFF
		CH –	CH +	CH SETUP
			ENTER	SYSTEM SETUP
			SET –
				·+/-/ENTER/MENUÒ			Other
2
			menu screen is cleared.				functions
	Press ENTER to select “ON”.
			Then press VCR MENU until the
	SET +		VCR MENU	MENU			(VCR)
			SETUP	TIMER REC SET
				AUTO REPEAT	ON	OFF
CH –		CH +		SAP	ON	OFF
	ENTER			CH SETUP

SYSTEM SETUP

SET –

·+/-/ENTER/MENUÒ

Listening to SAP

When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen for about 4 seconds. This means that the “Second Audio Program” broadcasting is available.

STEREO SAP SAP

OR

Notes:

•When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

•When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cable not connected), the sound will be monaural.

39