Toshiba owner manual Transferring Logo Data, SL-9000N only, Verify SL-9000=CMT

11. PROGRAMMING PROCEDURES

11.18 TRANSFERRING LOGO DATA

11.18 TRANSFERRING LOGO DATA

Menu Page: 2

Item No.: 8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64 KB of RAM area is secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can be stored.

Before starting the following operation, set the initial setting #10-7 to 1.

<MENU>

Page 2

			Select a transmission item.
8	Load the tape into		1:	SAVE (SL-9000→CMT)
	the CMT Loader		2:	VERIFY (SL-9000=CMT)
			3:	LOAD (SL-9000←CMT)
ENTER	PROG.	<MENU>
		Page 2
	ESC.	Main
		<MENU>

NOTE: Two sizes of logos are printed differently as follows:

Print LOGO (320 x 118 dots)

<Display>

64

256

(Part of LOGO is displayed.)

80

<Label>

1st LOGO

160

2nd LOGO

<Receipt>

Display LOGO (256 x 64 dots)

(Part of LOGO is

printed.)

104

118

256 64

FSP LOGO (Part of LOGO is overlapped with FSP print area.)

1st LOGO (LOGO is printed on the center of printing area.)

160

64

2nd LOGO

(Part of LOGO is

SL-9000N only

(LOGO #1 & half of LOGO #2 are printed.

: Logo data

: Print/Display area

11-29

printed.)

FSP LOGO (LOGO is printed on part of FSP print area.)

SL-9000N only