Calling and Printing Logos | Toshiba SL-9000 specs

14. OPERATING PROCEDURES

14.8 CALLING AND PRINTING LOGOS

14.8CALLING AND PRINTING LOGOS

When the initial set #10-7 is set to “1” (or “2”: SL-9000N only), a logo containing a picture, a mark, a POP message, etc., can be printed on the ingredient label having 12 lines or more.

Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface.

Menu: REG., M.DOWN, or REWRAP

Mode: WEIGH, FIX, or BY COUNT

Press:

Enter the logo #. (1 to 26 or 1 to 99)

SL-9000N only

Press:

LOGO

Select the LOGO type

◇(LOGO (1) ↔ LOGO (2) ↔F.Shopper)

SL-9000N only

1	0

	0	or		C	Clear the entered
	0	or		C	logo #.

*

Start the label issue operation.

NOTES: 1. The logo # will be effective until it is changed or deleted.

(Logo # is still effective after turning power off and/or changing mode.)

2.Pressing thePRT/* key returns the display to the initial display of Weight mode. This clears the unit price and tare data.

3.LOGOs will not be printed together with a safe handling instruction on a label.

4.LOGOs will be printed in the center of a label.

5.LOGO # “1 to 26” or “1 to 99” is selectable with the initial setting #10-7. (SL- 9000N only)

14-13

Image 78

Contents

SL-9000/9000N-FFR-US/CA/QR Page Safety Summary Precautions Table of Contents 14.1 13.113.2 14.2 Introduction Accessories Applicable Model Specification Scale STLAN-2P OptionLON Tmcc Appearance Label Guide Printer Cover Main Power SwitchAdjustable Legs Meat Platter Power Cord Level Gauge Display US TypeCA/QR Type KEY Layout Programming KeyboardProgramming Keyboard Function Space SendProg Operation Keyboard and Speed Keyboard Operation Keyboard FunctionPLU DT/TM PRTFor Void Self Service Keyboard Zero KEY Layout Procedure Before Operation Speed KEY SET Installation Procedure Level Adjustment Removal and Replacement of Media Removal and Replacement of Media Power Outline of Operation 1/4LB KEY 100g, kg KEY LB/kg KEY Registration modeXNOT Available Tmcc CMT-port communicarion Clerk Label Programming Procedures How to access to Programming Menu Title and Contents of Programming Menu How to enter characters TEC Store PLU Data Edit Menu PLU Data Setting Set tare limit Auto Code Ingredient Message Nutrition Setting When entering PLU#, be careful of the following Daily Value Max digits Contents of Daily value Set the Daily Value Table Memory file is sorted when a memory full error occurs Deleting Nutrition DataMemory file sort PLU Verifying Label Menu Item No Verifies PLU data stored in the scale Address and Commercial Message Setting Combination Message Message construction Message display time Thank YOU Call Scrolling Flashing Curtaining Scrolling up Scrolling downThank YOU Thank YOU ANK YOU Call AGA Special Information Grade Line Department Number Speed KEY SettingSetting Department/Vendor Number Vendor Number Print Format By pressing Key Label Format Number Table Format No DATE/TIME Setting Menu Item NoCMT Operations Error code during PL-3 operation PL-3 Operation Transmission Item List Item #CMT Transmission Delay Time Table IN-LINE/LOCAL LON System Price Address SL-9000N only Cancel Retry ContinueData Transmission Initial #0 #19, SL-9000N only ① Weigh or Fix Price Format Default Bar Code FormatBAR Code Format ② By Count Format Flag PLU # UPC # PC/D Price Weight PLU # UPC # PC/D Additional 233 Title No Format Additional 221Additional 231 232 Additional 234 235 Additional 7,8 238 Additional 9,10 239 Transferring Logo Data SL-9000N onlyVerify SL-9000=CMT Idiom Setting Error message during data transmission Vendor Setting Free Format Setting Key functionsEnter SP-INFO/NET WT Logo Frequent Shopper Print coordinate How to access Report menu Programmed Data Verification ReportsMenu Set the zone PLU #. Ex. PLU #100 ～108 R S Password SecuritySetting Password and Protect Menu R S X Z × ー × Calling Menu by Entering Password Operating Procedures How to access REG., M.DOWN, or Rewrap menu Menu REG., M.DOWN, or Rewrap Mode Weigh Weighing Operation FIX Price Operation for US Type only By Count Operation For Print Count Operation To check the remaining number, clear the PLU and press Key Example B When operating in Fix or By Count mode Set the number of labels. Max labels Enter the PLU # Issuing Labels with NET Weight Statement for US Type only PLU Sample label 14-10 TARE/SAVE Function Procedures Calling and Printing Grade Lines Calling and Printing Logos Logo Menu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Selecting Print Item Date Change Batch Print Mode with 30 Items Run Assignment Unit Price Change and G.Line/LOGO Call Key is pressed to issue Label Issue Stop or CancelTotals Overflow error occurs when Key Visual Commodity Library Dpt # Floating Vendor Price deletion Subtotal How to access Read or Reset menu Total Operation PLU Total Report Hourly Total ReportGrand Total Report Ex. Report Menu Vendor Total Report For Enter PLU Total Error Message Table Programming Mode Label lssue Mode Report and Reset Mode LON System Mode Cleaning the Print Head Troubleshooting Before You Call for Service