Toshiba SL-9000 owner manual Floating Vendor

14. OPERATING PROCEDURES

14.13 FLOATING VENDOR

14.13 FLOATING VENDOR

Menu: REG

Mode: WEIGH, FIX, or BY COUNT

Floating vendor function allows you to register different commodities sales together. This function is available when the Initial Setting #11-1 is set to 1 and using a receipt.

Be sure to select IN-LINE in Section 11.15 LON SYSTEM even if no scale is connected, then enter the ID# 1, turn the power off and then on.

Maximum number of registerable commodities

One scale: 200 commodities

One vendor: 99 commodities

NOTES: 1. Print format varies depending on the settings of the Initial

Setting #11-1, 11-2, 11-3, 11-4 and 11-7.

2.Care must be taken for the following when a clerk label is printed.

(1)Cleark labels can not be used with Floating Clerk (receipt) in a system.

1)The clerk accumulation memory is used for the Flloating Clerk’s.

The clerk accumulation memory is used for the same system, the registered data by Floating Clerk (receipt use) and Clerk labels eill be stored into the same memory.

14-20