Basic operations
1Turn on the power.
Turn on the power by following the instructions in “Turning the power on (I)” 
.
2Activate the connected device.
Turn on and start the connected device such as a computer.
3Press the INPUT button.
See remote control section on 
.
4Adjust the focus.
Use the focus ring to adjust the focus.
5Adjust the vertical projection angle.
Rotate the foot adjuster to adjust the vertical position of the projection image. See foot
adjuster on 
.
6Adjust the volume.
Adjust the volume from the control panel or remote control.
Notes
•The DMDTM is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions.
•Although this projector supports a wide range of RGB signals 
, any signal formats not matched to native resolution of this projector (SVGA) will be expanded or shrunk, which will affect image quality slightly. To view
•With some models of computer having LCD displays or the like, displaying images simultaneously on the projector and the monitor’s display may prevent the images from displaying properly. If this happens, turn off the computer’s LCD display. For information on how to turn off the LCD display, see the owner’s manual of your computer.
•If a signal not supported by the projector is input, the “Unsupport signal” will appear.
•If an unavailable operation button is pressed, the 
icon will appear.
•The factory setting for the OSD language is “English”, other languages can be selected in the Default setting menu. 
26
