Using USB Memory (continued)
Exit Slideshow / Change slideshow settings
Press [Menu/input] key for longer than 1 second during the slideshow, and the following message appears.
Use 
or 
to select [Yes] and press 
, the slideshow ends and the projector switches to the file view mode.
Use 
or 
to select [No] and press 
, Menu OSD shows on the screen. Change the settings through menu system including USB slideshow setting.
About USB memory function
The USB terminal
The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB memory.
USB memory
•2GB limited USB memory size.
•Do not support USB HDD (Hard disk).
•Do not support USB hub.
USB devices whose operation has been verified.
TOSHIBA does not guarantee the operation of all listed USB devices.
TOSHIBA
•U2A series
•U2B series Sandisk
•SDCZ2 series
Backing up the data
Toshiba recommends that you back up the data saved in the memory PC card, the USB memory, and in the memory card before use. (Toshiba assumes no liability for losses incurred by data lost through the use of this projector.)
32
