56

Getting Started

Adding memory (optional)

The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules.

Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.

If the computer is on, begin at step 1; otherwise, skip to step 3.1Click Start, then Turn off computer or Shut Down (depending on the system).The Turn off computer or Shut down window appears.2Click Turn Off or Shut down.The operating system turns off the computer.

3Unplug and remove any cables connected to the computer, including the AC adaptor.

4Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 128.

5Close the display panel and turn the computer upside down to locate the memory module slot cover.

Front of computer

Memory module slot cover

(Sample Illustration) Locating the memory module slot cover