Toshiba Tecra A8 Configuring Hibernation mode options, Apply, Hibernate, Hibernate, Hibernation, Setup Action, When I close the lid, ❖When I close the lid

90	Getting Started
	Turning off the computer

Configuring Hibernation mode options

You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode.

To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility.

1Click Start, Control Panel, then click Performance and Maintenance.

2Click the Toshiba Power Saver icon.

3Click the Setup Action tab.

4Select Hibernation for the options you want.

❖When I press the power button

Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button.

❖When I close the lid

Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel.

5Click Apply.

6Click OK.

NOTE	For more information about the Power Saver utility, see
	“Toshiba Power Saver” on page 179.

Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set.