58

Getting Started

Adding memory (optional)

 

 

 

 

NOTE

If no memory slot is available, you must remove a module by

 

performing steps 2-3 of “Removing a memory module” on

 

page 60.

 

 

11Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket.

notch

latch

connector

latch

key

(Sample Illustration) Aligning the memory module into the socket

12Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).

(Sample Illustration) Inserting the module into the socket