Toshiba Tecra A8 Warning: Resume Failure, Press Any Key to Continue, Gently lift the memory module to a, (Sample Illustration) Removing the memory module

Getting Started	61
Adding memory (optional)

Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module.

Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.

The following message appears when you turn on the power:Warning: Resume FailurePress Any Key to Continue

If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for at least ten seconds, then turn the power on again.

2Pull the latches away from the memory module. The memory module pops up slightly.

3Gently lift the memory module to a 30-degree angle and slide it out of the slot.

Front of computer

Memory slots

(Sample Illustration) Removing the memory module4Replace the memory module slot cover and tighten the screw.