Toshiba tecra m2 Ports, Slots, TOSHIBA Dual Pointing Device, PC card, SD card, Parallel, Infrared, (USB 2.0), External monitor, Built-inTouch pad, Built-inAccuPoint

Introduction

TOSHIBA Dual Pointing Device

Built-in Touch pad	A Touch pad and control buttons in the palm rest
	enable control of the on-screen pointer and
	scrolling of windows.
Built-in AccuPoint	This pointer control stick, located in the center of
	the keyboard, provides convenient control of the
	cursor.
Ports
Parallel	Parallel printer or other parallel device
	(ECP compatible).
External monitor	15-pin, analog VGA port supports VESA DDC2B
	compatible functions.
Universal Serial Bus	The computer has two Universal Serial Bus ports
(USB 2.0)	that comply with the USB 2.0 standard, which
	enables data transfer speeds 40 times faster than
	the USB 1.1 standard. (The ports also support
	USB 1.1.)
Docking interface	This port enables connection of an optional
	Advanced Port Replicator III described in the
	Options section.
i.LINK™ (IEEE1394)	This port enables high-speed data transfer
	directly from external devices such as digital
	video cameras. Some models are equipped with
	a i.LINK port.
Infrared	The serial infrared port is compatible with Infrared
	Data Association (IrDA 1.1) standards. It enables
	cableless 4 Mbps, 1.152 Mbps, 115.2 kbps,
	57.6 kbps, 38.4 kbps, 19.2 kbps or 9.6 kbps data
	transfer with IrDA 1.1 compatible external
	devices.
Slots
PC card	The PC card slot accommodates two 5 mm Type
	II cards or one Type III card.
SD card	This slot lets you easily transfer data from devices,
	such as digital cameras and Personal Digital
	Assistants, that use SD card flash-memory.
	You can use memory module in this slot.

TECRA M2 1-7