Toshiba tecra m2 Standby, Hibernation, Heat dispersal

		Introduction
Heat dispersal	To protect from overheating, the CPU has an
	internal temperature sensor. If the computer’s
	internal temperature rises to a certain level, the
	cooling fan is turned on or the processing speed
	is lowered. Use the Fan item of the Basic Setup
	tab in TOSHIBA Power Saver.
	■ Maximum	Turns on fan first, then if
	Performance	necessary lowers CPU
		processing speed.
	■ Performance	Uses a combination of fan
		and lowering the CPU
		processing speed.
	■ Battery	Lowers the CPU processing
	optimized	speed first, then if necessary
		turns on the fan.
Hibernation	This feature lets you turn off the power without
	exiting from your software. The contents of main
	memory are saved to the hard disk, when you turn
	on the power again, you can continue working
	right where you left off. Refer to the Turning off the
	power section in Chapter 3, Getting Started, for
	details.
Standby	If you have to interrupt your work, you can turn off
	the power without exiting from your software.
	Data is maintained in the computer’s main

memory. When you turn on the power again, you can continue working right where you left off.

TECRA M2 1-12