Toshiba TECRA P5 Press the, Press the, (Default), Supervisor Password, Core Multi - Processing, Enabled is Dual Core mode, Virtualization Technology, Enabled, Disabled

HW Setup & BIOS Setup

Ending the BIOS Setup Program Halfway

The configuration settings can be terminated halfway without saving any of the changes made by following the steps detailed below:

1.Press the ESC key - the Exit without saving? (Y/N) prompt to be displayed at the bottom of the screen.

2.Press the Y key - the BIOS setup application will exit and the computer will automatically restart.

Supervisor Password

This setting, which is displayed on the first page of the setup screen, allows you to register a Supervisor Password of the computer.

Not Registered Supervisor Password has not been registered (Default).

Registered Supervisor Password has been registered.

The User Password and Supervisor Password configured in BIOS SETUP can also be changed or deleted using the TOSHIBA Password Utility. When unable to perform the following operations, use the TOSHIBA Password Utility to change or delete the configured Supervisor Password.

•Configuration changes in the BIOS Setup Program•Configuration changes in the HW Setup utility•Selection of the startup device during computer recovery.Core Multi - ProcessingThe Core Multi-Processing sets the CPU operating mode.Enabled is Dual Core mode.Disabled is Single Core mode.

Please note that this option is displayed only on models with an Intel® Core™ 2 Duo processor.

Enabled	Enables Core Multi - Processing functions
	(Default).
Disabled	Disables Core Multi - Processing functions.

Virtualization Technology

Virtualization Technology sets enable or disable of the Intel Virtualization Technology installed in the CPU.

Intel Virtualization Technology is the technique that allows one machine to operate as multiple virtual machines.

The Virtualization Technology is supported with some models.

User’s Manual 7-9