Toshiba TECRA P5 call, Modem, modem, function, directions, Communication, Restart Windows, Phone and Modem, off unexpectedly, You can hear a dial, Communication is cut

		Troubleshooting
i.LINK (IEEE1394) device
	Problem	Procedure
	i.LINK device does not	Make sure the cable is securely connected to the
	function	computer and to the device.
		Make sure the device’s power is turned on.
		Reinstall the drivers. Open the Windows
		Control Panel and double-click the Add
		Hardware icon. Follow the on-screen
		directions.
		Restart Windows.
		If problems persist, contact your dealer.

ModemRefer to Appendix C, AT Commands and Appendix D, S-registers.

Problem	Procedure
Communication	Make sure the computer’s internal modem
software can’t initialize	settings are correct. Refer to Phone and Modem
modem	Properties in the Control Panel.
You can hear a dial	If the call is going through a PBX machine, make
tone but can’t make a	sure the communication application’s tone dial
call	detection feature is disabled.
	You can also use the ATX command. Refer to
	Appendix C, AT Commands.

You place a call, but a connection can’t be made

Make sure the settings are correct in your communications application.

After making a call you can’t hear a ring

Make sure the tone or pulse selection in your communications application is set correctly.

You can also use the ATD command. Refer to Appendix C, AT Commands.

Communication is cut	The computer will automatically cut off
off unexpectedly	communication when connection with the carrier
	is not successful for a set time interval. Try
	lengthening this time interval.

A CONNECT display is quickly replaced by NO

CARRIER

Check the error control setting in your communications application.You can also use the AT\N command. Refer to Appendix C, AT Commands.

User’s Manual 8-21