Toshiba TECRA P5 TPM, (default), Sleep Mode, Clear TPM Owner, LCD Display Stretch, Security controller, and displayed (Default), switched to Hibernation Mode (Default)

HW Setup & BIOS Setup

(To access it, Power Options -> Change plan settings -> Change advanced power settings -> Battery)

The operation of this function is dependent upon battery status.The Critical Battery Wake-up only operates with Windows Vista™.

Enabled	When the remaining battery power is about to run
	out while the system is in Sleep Mode, the
	system is automatically woken up and then
	switched to Hibernation Mode (Default).
Disabled	No action is taken even if the remaining battery
	power is about to run out while the system is in
	Sleep Mode.

LCD Display StretchSelect the display function of the computer's display panel.The LCD Display Stretch is supported with some models.

Enabled	Display modes with low resolution are stretched
	and displayed (Default).
Disabled	Display modes with low resolution are not
	stretched and displayed in their original state.

Security controller

Please note that the security controller settings are available on the second page of the BIOS setup application.

TPM

This setting enables or disables the computer's Trusted Platform Module (TPM) security controller.

Enabled	Enable Trusted Platform Module security.
Disabled	Disable Trusted Platform Module security
	(default).

Clear TPM Owner

This setting is used to erase the data stored as part of the Trusted Platform Module, as would be required, for example, when disposing of the computer or when the owner of the computer changes. Once this operation is carried out, the Trusted Platform Module configuration settings are erased such that any encrypted data can no longer be decrypted and the files can no longer be read. In view of this you must ensure that you backup or delete the data as necessary before carrying out this operation.

User’s Manual 7-11