Toshiba TECRA P5 T Select tone dialing, Vn DCE response format, Result code selection, call progress monitoring, Busy, detect, signal, detect, Command, Dial tone

AT Commands

Result Codes:

OK n=0,1

ERROR Otherwise

T Select tone dialing

This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting.

Vn DCE response format

This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents.

V0 Displays result codes as digits.

V1 Displays result codes as text (default).

Result Codes: OK n=0,1 ERROR Otherwise

Xn	Result code selection, call progress monitoring
	This command selects which result codes will be used by the modem.
Command	Dial tone	Busy	Supported Result Code
	detect	signal
		detect
X0	Disable	Disable	OK, CONNECT, RING, NO CARRIER,
			ERROR
X1	Disable	Disable	OK, RING, NO CARRIER, ERROR,
			CONNECT <RATE>
X2	Enable	Disable	OK, RING, NO CARRIER, ERROR,
			NODIALTONE, CONNECT <RATE>
X3	Disable	Enable	OK, RING, NO CARRIER, ERROR, BUSY,
			CONNECT <RATE>, BLACKLISTED
X4 (default)	Enable	Enable	OK, RING, NO CARRIER, ERROR,
			NODIALTONE, BUSY, CONNECT <RATE>,
			DELAYED, BLACKLISTED, REORDER,
			WARBLE, CALL WAITING DETECTED
X5	Enable	Enable	OK, RING, NO CARRIER, ERROR,
			NODIALTONE, BUSY, CONNECT <RATE>,
			RRING, NO BONGTONE, DELAYED,
			BLACKLISTED, REORDER, WARBLE, CALL
			WAITING DETECTED

User’s Manual C-5