| Connecting a computer (COMPUTER IN 1 connector) |
|
|
| 22 |
|
|
|
|
You can project the picture from the computer.
Check that the power for the projector and computer is off before connecting the cables.
USB | MONITOR | COMPUTER IN 1 | COMPUTER IN 2 |
| OUT | ( Y/PB/PR ) |
|
| CONTROL |
|
|
AUDIO |
| VIDEO IN |
IN | R - AUDIO - L | VIDEO |
COMPUTER IN 1 Connector
For use as both Analog RGB (1) and Y/PB/PR input. At shipping from factory, it is set for use as Analog RGB (1) input.
AUDIO IN jack
For use as both audio signals for RGB input (analog RGB (1)/analog RGB (2)/ digital RGB) and Y/PB/PR input.
Connecting a Mac adapter for |
| |
Macintosh computers (Supplied) | Computer | |
To COMPUTER IN 1 Connector | ||
| ||
Be sure to connect in the proper |
| |
direction. |
|
| To monitor port |
| RGB cable |
| (Supplied) |
To AUDIO IN jack | φ 3.5mm Stereo |
| |
Audio cable (Supplied) | To audio output port |
Notes
•The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
•You may not be able to connect some computers to the projector. For details, consult the dealer.
•When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan 21 compatible). For some models the adapter is not required.
•Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc. | Continued |