FULL MENU settings - Reset

•You can return the adjusting and setting value of all menus to the factory default setting. ("H-reference value" below also returns to the value at the factory default setting.)

•The projector stores the standard conditions of horizontal installation, but depending on the usage environment (if the projector is subject to vibrations or shock, etc.), the standard may change.

If the keystone distortion is not corrected properly when "Auto. V-keystone" 35 is executed with the screen installed vertically, put the projector's foot adjustor back 20 and set the projector on a flat surface, then execute "H-reference reset"

 

 

 

 

Reset all

EXEC.

The adjustments and settings of all menus are returned to the factory default setting

 

 

 

 

H-reference reset

EXEC.

The horizontal reference value for "Auto. V-keystone" is calibrated automatically

Notes

•If the projector's foot adjuster is used or the projector is inclided, "H-reference reset" will not be executed properly.

•The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un- plugged or if a power failure occurs while the projector is on, the settings are not memorized.

52

& Adjustments

Settings