Toshiba TLP780U W.BALANCE, Document camera imaging, Project a white paper and enlarge it to fill the screen, W.BALANCE Press W.BALANCE to turn the LOCK indicator on

Lock the white balance 60

This projector's camera is always being adjusted automatically for projected color balance;

however, the balance can shift away from optimal due to the color scheme of the document. Should this occur, the white balance can be set to a fixed condition by using the following procedure.

Camera control panel

W.BALANCE OVERLAY ARM LIGHT

LOCK

CAMERACAMERA

GAIN

2

1

2 LOCK

Notes

Project a white paper and enlarge it to fill the screen. W.BALANCE Press W.BALANCE to turn the LOCK indicator on.

The white balance is locked.

To release the white balance, press W.BALANCE again to turn the LOCK indicator off.

Document camera imaging

•If you raise up the arm while the camera input is selected, the color of the picture may vary for an instant due to the automatic white balance adjustment. This is not a malfunction.

•If you put back the arm and raise it up while the white balance is locked (the LOCK indicator is lit), the projector releases the white balance.

•Should this be the case, or if you would like to adjust to a desired tint, adjust "R-level", "G- level" or "B-level" on the FULL MENU [Color] screen.