Lamp replacement (continued)

 

 

 

67

 

 

 

 

Notes

• When the CALL button is pressed, the "Lamp

time" (the approximate amount of time the lamp

has been used) is displayed. 41

• The lamp should be replaced if the total work-

ing time exceeds about 1,000 hours.

When the "Lamp time" is displayed 1000 hours,

the icon

and a message appear. They will

disappear when you do some operation.

• Attach the lamp cover firmly after replacing the

lamp. If it is not set correctly, the power will not

turn on.

 

• Use a new lamp when replacing it.

5

Load a new lamp.

Slide until it hits the bottom and tighten the two fixed screws.

• The lamp is made of glass and is very fragile.

Do not touch the lamp with your bare hands

and do not jolt or damage it. Do not use an

exhausted lamp.

• Dispose the exhausted lamp as toxic wastes.

6

3

2

Attach the lamp cover.

Slide the cover in place and tighten two screws.

1

Reset the lamp timer.

7 Refer to the lamp instructions for resetting.

Maintenance