Picture projection with the document imaging camera (continued)

 

 

 

58

 

 

 

 

Camera control panel

W.BALANCE

OVERLAY

ARM LIGHT

LOCK

CAMERACAMERA

GAIN

6

6

 

 

 

 

CAMERA

 

Press CAMERA GAIN (+/-) to improve view

 

 

 

 

 

 

 

 

GAIN

 

 

 

 

 

 

 

 

 

 

 

 

 

of a camera subject which is too dark or vivid.

 

 

 

 

 

 

 

 

Notes

•You can adjust the "Sharpness" of the camera image on the menu screen. 46

•If the image flickers due to a fluorescent light in the room, either turn off the fluorescent light

or set the "Shutter" from the menu screen. 46

Note that the image may still flicker due to the lighting, the document status, the image adjustment, etc., even if the "Shutter" setting is changed.

7

When finished, turn off the light and close it,

 

and put back the arm.

Document cameraimaging

"Full" the camera's full image is compressed to 1024 x 768 dots. If "Thru" is selected, the

Follow the steps of "Preparation of the document imaging camera" in reverse.

Notes

• Though this projector uses a 1.45 million pixel camera unit, the images projected on the screen are 1024 x 768 dot images. If the "Screen size" in the menu screen 46 is set to

1024 x 768 dots at the center of the image are projected.

• The light turns off automatically when the arm is leaned.

• When the arm is not raised up, the camera source cannot be projected.

• In the camera input selected, audio signals are not output.