| Lamp replacement |
|
|
| 66 |
|
|
|
|
The lamp will eventually begin to project dark or
dull pictures and finally will not light up.1 Unplug the power cord. (Lamp's life length depends on the use condition.)
In such a case, replace the lamp with new one.
CAUTION | 2 Wait until the lamp gets cold enough. | |||
• If you use the projector mounted on the ceiling, |
|
|
|
|
ask the dealer to carry out the maintenance | 3 |
|
| Take off the lamp cover on the |
such as cleaning or replacement of the lamp. |
|
| ||
• When replacing, always use lamp "TLPL78" |
|
| bottom panel. | |
(sold separately). For detail, refer to the lamp |
| 1 |
| Loosen two screws, and pull off the lamp cover. |
instruction. |
| 2 |
|
|
• If you have been using the projector, the lamp |
|
| Lamp cover | |
will be very hot, and may cause burn injuries. |
|
|
| |
|
|
|
| |
Wait for the lamp to cool (for longer than 1 hour) |
|
|
|
|
before replacing it. |
|
|
|
|
• If the lamp should break, please handle with |
|
|
|
|
care to avoid injury due to broken pieces and |
|
|
|
|
contact your dealer for repair service. |
|
|
|
|
| 4 | 1 |
| Pull out the lamp. |
| 2 | Loosen the two fixing screws, and lift up the handle | ||
|
| |||
|
|
|
| to pull out the lamp. |
Continued
Maintenance