Toshiba toshiba computer 30 days, RTC battery, Battery pack, (sleep mode), (shut down mode), Extending battery life, Retaining data with power off, 1.Turn off the computer’s power

A500/A500D series

■Whether you close the display panel when you are not using the keyboard - closing the display saves power.

■The environmental temperature - operating time decreases at low temperatures.

■The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery pack.

Retaining data with power off

When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.

	Retention Time
Battery type	State and Retention Time
Battery pack	2 days for 12 cell, 1 day for 6 cell, 0.5 day for 3 cell
	(sleep mode)
	20 days for 12 cell, 10 days for 6 cell, 5 days for 3 cell
	(shut down mode)
RTC battery	30 days

Extending battery lifeTo maximize the life of your battery packs:

■At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps as detailed below.

1.Turn off the computer’s power.

2.Disconnect the AC adaptor and turn on the computer’s power - if it does not turn on then go to Step 4.

3.Operate the computer on battery power for five minutes. If you find that the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged, however, if the Battery indicator flashes or there is some other warning to indicate a low battery condition, go to Step 4.

4.Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. The DC IN indicator should glow white, and the Battery indicator should glow amber to indicate that the battery pack is being charged, however, in the event that DC IN indicator does not glow this indicates that power is not being supplied - check the connections for the AC adaptor and the power cord.

5.Charge the battery pack until the Battery indicator glows white.■If you have extra battery packs, rotate their use.

■If you will not be using the system for an extended period, for example for more than one month, remove the battery pack from the computer.

6-8 User’s Manual